This is an interface for front panel audio cable that allows convenient connection and control of audio devices. Unplug the power cord from the wall socket before touching any component. Please check if the CPU fan on the motherboard functions properly before you resume the system. Use this to set addresses for the onboard serial ports or disable Serial Ports. Replace the system cover. Do not over-tighten the screws!

Uploader: Tautaur
Date Added: 13 December 2013
File Size: 39.20 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 42380
Price: Free* [*Free Regsitration Required]

Position the CPU directly above the socket such that its marked corner matches the base of the socket lever. Make sure to set the partition of the Primary IDE hard disk drives to active. This allows the user to set CPU host frequency manually.

ASRock K7VT2 – motherboard – ATX – Socket A – KTA Overview – CNET

To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Before installing the expansion card, read the documentation of the expansion card and make necessary hardware settings for the card.

In these cases, select [User] to manually enter the IDE hard disk drive parameters. Do not over-tighten the screws!


Use keys to move between the Hour, Minute and Second fields. Remove the system unit cover if your motherboard is already in stalled in a chassis. If you already have a password, you must enter your current password first in order to create a new asrockk.

This automatically activates the Numeric Lock function after boot up.

ASRock K7VT2 – motherboard – ATX – Socket A – KT266A

When the menu appears, the hard disk drive field displays the size for the hard disk drive that you configured. Because motherboard settings and hardware options vary, use the setup procedures in this chapter for general reference only. Select [Auto] to automatically detect hard disk drive.

Enable or Disable IDE controllers. COM 1 Parallel port: Failure to do so may cause physical injuries to you and damages to auudio components. User password has been set.

For proper installation, please kindly refer to the instruction manuals of vendors of CPU fan and heatsink. This connector supports an optional wireless transmitting and receiving infrared module. Installing an expansion card Step 1.

Click on a specific item then follow the installation wizard to install it. This allows you to set the power state when the AC power restore aucio the previous AC power loss. Make sure that the CPU and the heatsink are securely fastened and in good contact with each other.


ASRock assumes no responsibility for any errors or omissions that may appear in this manual. Please make sure to disconnect power supply before adding or removing DIMMs k7vt the system components. Write Pre-compensation Enter Write Pre-compensation sector. Second] Set the system to the time that you specify.

Unplug asroco power cord from the wall socket before touching any component. Connect an ATX power supply to the connector. It refers to a section of the PCI memory address range used for graphics memory.

Aueio use one single type of DIMMs at one time. The following table lists the keys found in the legend bar with their corresponding functions. The default is 4X. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.

The default is 1.